newmotion Home Advanced Edition 7 Mode D'emploi page 19

2. PRODUCT OVERVIEW
2.2 TECHNICAL SPECIFICATIONS (CONTINUED)
Stand-by consumption
Operating temperature range
Operating humidity range
Operating air pressure range
Maximum mounting height socket
Advised mounting height socket
Mounting position
Function for ventilation according to IEC-61851
Configuration
P1 DONGLE SPECIFICATIONS
Dimensions
Weight
Required input
Operating humidity range
Operating temperature range
Certificates
Enclosure of the electrival cabinet requirement
* The maximum charge capacity of the charge point depends on several factors. This includes: local rules & regulations,
the type of EV, the grid connection at your location and the electricity usage of your building;
** Use the configuration software in order to change the charge capacity (only on site - locally - possible by an installer);
*** The charge point shall not be exposed to direct water jets or cleaned with high water pressure devices. The charge
point shall not be installed outdoors with a road proximity less then 5 meters.
INSTALLATIEHANDLEIDING – P19
INSTALLATION MANUAL – P19 | P19
3-5W
-30℃ to +50℃
5% to 95%
860 hPa to 1060 hPa
1.5 meter above ground
1 meter above ground
Vertical and upright postion only
Not supported
Local configuration using the Installer App on a
smartphone for Cable lock, firmware update, DPM and
authentication
55x25x30 mm
27 gr
5V DC - 100mA
5-95%
5-55 °C
CE
IEC62368-1:2014
Immunity according to EN 61326-1:2013
Must be able to resist a force of 250N
VERSION 0129NM02INT01
07ANM20INT01