Beta 1464PF Mode D'emploi page 6

EN I
INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
DESCRIPTION
This brake pressure tester can accurately measure pressures up to 200 bar.
The sensors are so designed that they can be disconnected. So in case a sensor needs to
be replaced, it is not necessary to send the tester to the technical service; just purchase a
new sensor and, when connected, the tester will automatically recognize the new sensor.
CHARACTERISTICS
• Type of sensor ............... : Electronic ratiometric.
• Sensor accuracy ........... : ±1.5%
• Range ............................ : 0 ÷ 200 bar
Included accessories:
2 – 200 bar sensors with hose and bleeding valve 1 – Pressure adapter
1 – Teves Adapter
1 – 45° Swivel Fitting
1 – 90° Swivel Fitting
2 – M10 x 1.5 Straight Fitting (#1)
2 – M10 x 1.0 Straight Fitting (#2)
2 – M7 x 1.0 Straight Fitting (#3)
2 – M8 x 1.25 Straight Fitting (#4)
2 – 3/8–24 Straight Fitting (#5)
2 – 1/4–28 Straight Fitting (#6)
2 – 7/16–24 Straight Fitting (#7)
2 – 7/16–20 Straight Fitting (#8)
2 – 5/16–24 Straight Fitting (#9)
6