Introduction; Features; System Requirements; Precautions - Sony External HiFD Drive Mode D'emploi

Introduction

Introduction

Features

This HiFD (High-Capacity Floppy Disk) 3.5 inch floppy drive
system offers the following:
• 200 MB formatted storage capacity
• Compatibility with 1.44 MB & 720 kB diskettes
• High speed data access time (49 ms average)
• Parallel port interface
• Printer connector for printer attachment to drive
• 600 kB/s max transfer rate (with EPP/ECP port)

System requirements

• IBM-compatible PC, 486DX or higher
• MS-DOS/PC-DOS 5.0 or higher, Windows 3.x, Windows 95/
• 8 MB or more system RAM
• 5 MB of hard disk space
• Printer port with DB25 connector
• 3.5" floppy disk drive

Precautions

On Installation
Avoid areas with high humidity or temperature, mechanical
vibration and direct sunlight.
During Operation
• Operate drive only on a sturdy, flat surface.
• Do not move drive during operation, it may cause a
• Avoid sudden temperature change, it may cause internal
6
98 or Windows NT 4.0.
malfunction.
condensation. If ambient temperature suddenly changes, wait
at least 1 hour before turning unit off. Immediate operation
after sudden temperature change may cause malfunction.