Dometic TROPICOOL TCX 14 Notice D'utilisation page 12

Operation
6.3 Switch on the cooling box
A
NOTICE!
Take care that there are only objects or goods in the cooling device
which may be cooled or heated to the selected temperature.
➤ Place the cooling device on a stable base.
➤ Connect the cooling device
– using the AC connection cable supplied (fig. 1 2, page 3) to an AC mains
power socket or ...
– using the DC connection cable supplied (fig. 1 3, page 3) to the DC socket
in the vehicle (fig. 4, page 4).
➤ Press the button "P" at the control panel to switch on the cooling device.
✓ The cooling device starts to cool or heat the interior space.
Operating display
red (fig. 3 2, page 3)
blue (fig. 3 3, page 3)
6.4 Switch over between cooling and heating
➤ If you want to switch over between cooling and heating, press the
button "HOT/COLD".
I
NOTE
The control unit of the cooling device has a memory function.
It memorises the selected temperature range for each mode (cooling
and heating). Thus the temperature range which is previously selected in
the mode is set again with each switching on or switching over.
✓ The red or blue operating display lights up and the device starts to cool/heat.
➤ When you want to finish the cooling or heating process, press the button "P".
➤ When you stop using the cooling device, disconnect it from the mains.
12
TCX14, TCX21, TCX35
Operating mode
heating
cooling
EN