TIPS FOR USE
Chopping of
vegetables, fruits, bread and rolls for making bread crumbs, meat, chocolate, nuts.
You will get very good results if you first cut the ingredients into approx. 1-inch cubes.
OPERATION
1.
Attention: Do not switch on the appliance without first putting ingredients in the mixing bowl,
since this can damage the motor.
2.
Ensure that the appliance is switched off via the ON/OFF switch.
3.
Remove the knife guard from the chopping knife.
Only grasp the knife on the upper pin, the blades of the knife are very sharp. Danger of injury.
4.
Place the chopping knife on the shaft in the glass container. The
knife must be firmly seated.
5.
Prepare the desired food. Cut meat, vegetables and fruit (it may
be necessary to peel the fruit beforehand) into small cubes.
6.
Put the food in the glass container. Ensure that the MAX mark
on the glass container is not exceeded to prevent appliance
damage. In this regard, bear in mind that many food items, such
as meat, develop more volume through the chopping process.
7.
Place the lid on the bowl
8.
Fit on the motor block.
9.
Plug the power cord into an electrical outlet.
10. Press the ON/OFF button. The appliance works in brief, forceful thrusts as long as you press
and hold the ON/OFF button. Release the ON/OFF button to stop the appliance.
Stand 11.3.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
23 von 76