dji RONIN-S Guide De L'utilisateur page 3

Usage
1. Slide the adapter into place on the top of the grip.
2. Connect the adapter to a power outlet to charge the grip using the USB-C port, or
connect the USB-A port to charge an external device.
When charging an external device using the USB-A port, press the grip's power button
once to start charging. When the grip is connected to a power outlet via the USB-C
port, the external device will not be able to charge at the same time as there will be no
output current from the USB-A port.
Ensure the adapter is locked in place when mounting to avoid the adapter
and grip disconnecting.
DO NOT shake the grip with the adapter attached.
Please use the standard USB power adapter for the Ronin-S when charging
the grip. If not, an FCC/CE certified USB power adapter that supports Quick
Charge
TM
prolong the charging time.
USB-C
USB-A
To charge an external device
protocol is recommended. Using other USB power adapters may
To charge
the grip
100-240 V,
50-60 Hz
3