dji RONIN-S Guide De L'utilisateur page 2

EN
Disclaimer
Congratulations on purchasing your new DJI OSMO TM product. The information in
this document affects your safety, legal rights, and responsibilities. Read this entire
document carefully to ensure proper configuration before use. Failure to read and
follow instructions and warnings in this document may result in serious injury to
yourself or others, damage to your DJI OSMO product, or to other objects in the
vicinity. This document and all other collateral documents are subject to change at
the sole discretion of DJI OSMO.
By using this product, you hereby signify that you have read this disclaimer and
warning carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your conduct
while using this product, and for any consequences thereof. You agree to use this
product only for purposes that are proper and in accordance with all applicable
laws, rules, and regulations, and all terms, precautions, practices, policies, and
guidelines DJI OSMO has made and may make available.
DJI OSMO accepts no liability for damage, injury, or any legal responsibility incurred
directly or indirectly from the use of this product. The user shall observe safe and
lawful practices including, but not limited to, those outlined in this document.
Notwithstanding the above, your statutory rights under the applicable national
legislation are not affected by this disclaimer.
OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated
as "DJI OSMO") and its affiliated companies. Names of products, brands, etc.,
appearing in this document are trademarks or registered trademarks of their
respective owner companies. This product and document are copyright of DJI
OSMO with all rights reserved. No part of this product or document shall be
reproduced in any form without the prior written consent of or authorization from DJI
OSMO.
Warning
1. The RONIN -S Battery Adapter is only compatible with the Ronin-S Grip (built-in
TM
battery model: RB-2400 mAh-14.4V). DO NOT mount the adapter onto other grips.
2. DO NOT touch the contacts on the adapter.
3. If there is a noticeable buildup of debris, wipe the contacts with a clean, dry cloth.
Introduction
The Ronin-S Battery Adapter is designed to charge the Ronin-S Grip without being
attached to the gimbal by connecting it directly to a power outlet. The grip can also
work as a portable power bank to charge external devices (e.g., mobile devices,
tablets, etc.) connected to the adapter's USB-A port.
2