Salter SVBK3R Ultra Slim Mode D'emploi Et Garantie page 2

9050_IB.qxd:Layout 1
This scale features our convenient step-on operation. Once initialised the scale can be operated by
simply stepping straight on the platform – no more waiting!
1. Open the battery compartment on the scale underside.
2. Insert batteries (4 x AAA) observing the polarity signs (+ and -) inside the battery compartment.
3. Close the battery compartment.
4. Select kg, st or lb weight mode by the switch on the underside of the scale.
5. For use on carpet attach enclosed carpet feet.
6. Position scale on a firm flat surface.
1. Press the platform centre and remove your foot.
2. '0.0' will be displayed.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved. At all other times step
straight on the scale.
1. Step on and stand very still while the scale computes your weight.
2. Your weight is displayed.
3. Step off.Your weight will be displayed for a few seconds.
4. The scale will switch off.
---- Weight exceeds maximum capacity.
Lo Replace battery.
2
9/2/09 09:51 Page 2
NEW FEATURE!
PREPARING YOUR SCALE
INITIALISING YOUR SCALE
OPERATING YOUR SCALE
WARNING INDICATORS