Zodiac BARACUDA ZIPPY Guide Du Propriétaire page 5

Assemble the Hose
Lay hoses in a straight line in the sun for 1 hour to remove hose memory. Measure the hose length from
the return inlet to the farthest point in the pool. This is the total length of Zippy hose needed. If you need
more hose, see your Zodiac dealer for additional sections.
To assemble the hoses, connect the male end of the hose section into the female end. You will hear a loud
snap when they are connected properly. Each section should swivel easily.
Connect the 2 ft. hose section to the Wall Adapter and the Star Control® Assembly to the opposite end of
the 2 ft. hose section.
Wall Adapter 2' Hose Section Star Control Assembly 5' Hose Sections
5