Tennant V14 Série Mode D'emploi page 5

DESCRIPTION AND ASSEMBLY
A - Motor block.
B - Switch.
D - Float: its purpose is to avoid that liquid may
goes inside motor block during suction.
E - Polyester fi lter to set into the tank to pick
up dust, and to remove for liquid suction.
F - Hooks for tightening of motor block to
tank.
G - Suction inlet.
H - Tank.
L - Flexible hose.
GB
M - Tube.
P - Round brush.
Q - Flat lance.
R - Dust tool.
S - Wet tool.
ATTENTION
In order to keep in good effi ciency the machine
it is useful to clean the polyester fi lter after each
utilization.
Tennant V14
N.B. Drawings above reported
are merely indicative.
5