Fan Diagram - BIG ASS FANS Powerfoil X3.0 Manuel D'installation

Contact Customer Service if you are missing any parts or hardware. If you ordered multiple fans, keep the
components of each fan together. Each fan has differently rated components that are not interchangeable.
Mount Brackets
Upper Safety Cable
Lower Yoke Brackets
Variable Frequency Drive (VFD)
Lower Safety Cables
AirFences
®
Airfoils
1. Used only if mounting fan to bar joists. The number needed depends on the number of angle irons used.
2. Used only if mounting fan to an I-beam. Spacers are used only when the I-beam flange exceeds 3/8" (10 mm).
3. Powerfoil winglets are standard. Powerfoil Plus winglets are available as an option.
4. Not shown. Guy wires are included only if the fan's lateral movement needs to be restrained.

FAN DIAGRAM

Rectangular Washers
Gearbox
Hub
Hub Cover
WWW.BIGASSFANS.COM
1
Extension Tube
Powerfoil
Winglets
© 2018 DELTA T LLC ALL RIGHTS RESERVED.
Beam Clips
2
Spacers
2
Pivot Bracket
Upper Yoke Brackets
Motor
Powerfoil Plus
Winglets
3
3
Airfoil Retainers
Hardware Boards 4
Guy Wires
4
3