Returns; Disposal; Technical Data - Tintometer Lovibond SD 400 Oxi L Mode D'emploi

12. Returns

All instruments which are sent back to the manufacturer must be free from meas-
urement substance remains and other harmful substances. Measurement substance
remains on the housing or on the sensor can endanger persons or the environment.
Use suitable transport packaging for the return of the instrument, especially if it is still a
functioning instrument. Make sure that the instrument is protected with sufficient insulating
material in the packaging.

13. Disposal

Dispose of depleted batteries at a collection centre designated for this purpose.
The instrument may not be disposed of with the household waste. If the instrument needs
to be disposed of, send it directly to us (with sufficient postage paid). We shall dispose of the
equipment properly and in an environmentally friendly manner.

14. Technical data

Sensor
Oxygen, dissolved
- Measurement range
- Precision
- Resolution
Temperature
- Measurement range
- Precision
- Resolution
Sensor membrane
Dimensions
Device
Sensor
Power supply
Cable length
Connections
Device weight
Data storage
Reaction time
Flow
Salt compensation
Certificates
SD_400 Oxi L_4a 01/2021
Optical (measurement of the luminescence life)
0 – 50 mg/l or 0 – 500 % air saturation
0 – 20 mg/l or 0 – 200 %: ± 1 % of meas. or
±0.1 mg/l (higher value applies)
>200 % or >20 mg/l: ± 10 % of meas.
0.1 %, 0.01 mg/l
-5 – 50 °C (storage and operating temperature)
± 0.2 %
0.1 °C
Plastic
approx. 162 x 97 x 50 mm (L x W x H)
approx. 287 mm length, ø 33 mm incl. storage
flask
4 x AA Alkaline or 5 VDC Micro USB
1.5 m, 3 m, 10 m cable length
4-pin, M9
330 g (including batteries)
Micro SD card
40 sec. up to 90 % of the measurement value is
reached (T-90)
Not necessary
Automatic after manual entry
CE
31