Saving And Viewing Measurement Values; Software For Data Transmission - Tintometer Lovibond SD 400 Oxi L Mode D'emploi

9.5 Saving and viewing measurement values

The measurement values shown in the display can be saved with the SAVE function in the
menu as follows:
1. The menu item SAVE is selected with the arrow keys (RIGHT/LEFT) and confirmed with
ENTER.
2. DATA SAVED is shown in the display.
3. Confirm with ENTER. The data shown in the display is saved with time and date.
Using appropriate software, the saved data can be transferred from the Micro SD card to a
PC (see section 9.6). The stored data can also be shown on the display as follows:
1. MEM is selected with the arrow keys (RIGHT/LEFT) and confirmed with ENTER.
2. The menu display shows: DISPLAY SAVED DATA and DELETE ALL DATA and CANCEL.
Selection can be made with the arrow keys (UP/DOWN) and confirmation with ENTER.

9.6 Software for data transmission

The software for the data transmission and data display on a PC is stored on the Micro SD
in the instrument. To install the program, setup.exe is copied from the SD card to the PC
running Windows ® and executed. The data is automatically collected and displayed on the
user panel as follows:
Attention: The min/max/mean values are only based on the last 10,000 data entries.
Installation of the user program takes place as follows:
1. Remove the SD card from the memory card slot in the measuring device.
2. The SD card is inserted in a card reader (not included in the scope of deliver contents)
and connected to the PC.
3. The "setup" file is opened from the SD card by double-clicking and the installation is
carried out.
4. Before the instrument is switched on, the SD card must be re-inserted in the memory card
slot in the instrument.
Attention: Please ensure that the card is inserted correctly in the memory card slot.
SD_400 Oxi L_4a 01/2021
29