Haier QWR04D R Série Instructions D'installation Et Guide De L'utilisateur page 12

INSTALLATION INSTRUCTIONS
PULL OUT UPPER DOOR GASKET
Pull-out the upper part of the door gasket, and unsnap
the trim on the back side of the door. (Remove from the
left side opening)
REMOVE SCREWS FROM TOP HINGE
Remove 2 screws from the top hinge and lift the door
off of the bottom hinge. Remove the plastic hinge cover
from the top hinge and then remove the top hinge from
the door.
REVERSING TOP HINGE
Use a wrench to unscrew the hinge shaft. Install the
shaft on the opposite side of the hinge
12
REMOVE THE DOOR CAM AND
BRACKET
Remove the door cam and door bracket from the
bottom of the door. Find the new door cam in the parts
bag. Install the door bracket and the new door cam on
the other side of the door.
REMOVE BOTTOM HINGE ASSEMBLY
Tilt the cabinet (less than 45°)and remove the
bottom hinge assembly (3 screws) and the other
adjustable foot.
REMOVE LOWER HINGE CAM AND
HINGE SHAFT
Remove the lower hinge cam and hinge shaft. Install the
shaft on the opposite side of the lower hinge. Take out
the hinge cam from the parts bag and install it on the
lower hinge shaft.
49-1000564 Rev. 0