ARIETE MV7 HIDRO Instructions D'emploi page 16

EN
• When the appliance is not in use, always lock the steam dispensing button with
the special cursor.
• If the steam button is pressed before the boiler has reached the optimum tempera-
ture, then water instead of steam could come out of the nozzle.
• Never touch hot surfaces while using the product. Leave attachments to cool
before replacing them.
• Even when the appliance is not in operation, unplug it from the power mains
and leave it to cool before inserting or removing single parts or before
cleaning it.
IMPORTANT: danger of scalds
Ÿ
NEVER OPEN THE SAFETY CAP DURING USE.
IMPORTANT: Before unscrewing the safety cap, proceed as follows:
ü unplug the appliance from the mains power socket;
ü slowly unscrew the safety cap and wait a few seconds
IMPORTANT possible damage to materials
• Before using the product, make sure that all items, surfaces and fabrics to be
cleaned are resistant to or compatible with the high temperature of the steam.
Specifically, treated terracotta flooring, wooden surfaces or delicate fabrics, such
as silk or velvet, should not be treated without first consulting the instructions from
the manufacturer and carrying out a test on a small hidden sample part.
• Never use in swimming pools containing water.
• Never add scale removers, fragrances, alcohols or detergents to the boiler tank, as these
could damage the appliance. We recommend filling with tap water or alternatively, with
50% demineralised water and 50% tap water in areas where the water is very hard.
• Never use the appliance if there is no water in the boiler tank as this could cause
serious damage to the pump.
• Before switching the appliance on or off, make sure that there is enough water
inside the tank (M). If it is necessary to fill the tank during use, proceed as
WARNING danger of scalds
before unscrewing it fully;
- 14 -