Displays And Pushbuttons; Functions - Becker Centronic EasyControl EC541 Notice D'utilisation

Operating Instructions

Displays and pushbuttons

Transmission control light
A radio signal is indicated by the transmission control light being lit.
If the battery starts running out, the transmission control light fl ashes during
transmission.
The transmitter power and/or radio range is reduced when the battery is run-
ning low. If the transmission control light is no longer lit when the pushbutton is
pressed, the batteries must be changed.
Group
Group control means controlling one or several receivers at the same time. The
programmed group is activated using a single command.
When the EC541 is operated, the group is controlled using by means of a radio
channel.
12
UP pushbutton
STOP pushbutton
DOWN pushbutton
Battery compartment
Programming pushbutton
Transmission control light

Functions