Change Of Hinge Side - Vestfrost WFG46 Mode D'emploi

Change of hinge side

The door can be changed from right-hinged to left-hinged and vice versa as follows:
fig. 6.1
fig. 6.3
fig. 6.5
1. Lower hinge (right)
6. Hinge screws
10. Door fittings
1. Open the door to a 90 degrees angle, take out the 2 screws (2) from lower door hing (3),
remove the door (4), Remove the door hing (3) from the door, (Fig. 6.1).
2. Unscrew the screws (11) from the door fittings (10), and relocate it at the opposite side of the
door (fig. 6.1)
3. Unscrew the 3 hinge screws (6) from the top hinge (5) and remove it (fig. 6.3).
4. Remove hole covers (8) and mount the spare top hinge (7) at the opposite side of the cabinet
with the 3 screws (fig. 6.4).
5. Mount the spare lower hinge (9) (fig. 6.5).
6. Mount and align the door.
7. Insert the hole covers to cover the holes (8).
2. Screws 3. Door hinge
7. Top hinge (left)
11. Screws
fig. 6.2
fig. 6.4
Ensure that the cabinet is not
connected to the mains and
place the cabinet on the back.
SUPPORT THE DOOR !
4. Door
8. Hole cover
11
GB
5. Top hinge (right)
9. Lower hinge (left)