Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GWS Professional 20-230 H Notice Originale

OBJ_BUCH-827-008.book Page 11 Monday, October 24, 2016 2:46 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Spindle lock button
2 On/Off switch
3 Auxiliary handle (insulated gripping surface)
4 Grinder spindle
5 Mounting flange with O-ring
6 Grinding wheel*
7 Clamping nut

Technical Data

Angle Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Reduced starting current
Rotatable main handle
Run-on Brake
Weight according to EPTA-Procedure 01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
Protection class
Angle Grinder
Article number
Rated power input
Output power
Bosch Power Tools
8 Two-pin spanner for clamping nut*
9 Quick-clamping nut *
10 Carbide grinding head*
11 Cutting disc*
12 Hand guard*
13 Spacer discs*
14 Rubber sanding plate*
15 Sanding sheet*
16 Round nut*
17 Cup brush*
18 Cutting guide with dust extraction protection guard *
19 Diamond cutting disc*
20 Handle (insulated gripping surface)
21 Protection guard for grinding (clamping screw)
22 Locking screw for protection guard
23 Protection guard for cutting (clamping screw)*
24 Protection guard for grinding cup*
25 Grinding cup*
26 Two-pin spanner, offset, for grinding cup*
27 Vibration damper
28 Protection guard for grinding
29 Encoding key
30 Clamping lever for protection guard
31 Screw for adjustment of protection guard
32 Protection guard for cutting
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ... 22-180 22-230
H H
3 601 ... H81 1.. H82 1..
W 2200 2200
W 1500 1500
-1
min 8500 6500
mm 180 230
M 14 M 14
mm 25 25
– –
– –
– –
kg 5.1 5.1
kg 5.0 5.0
/II /II
GWS ... 24-230 24-230
H
3 601 ... H84 1.. H84 2..
W 2400
W 1600
1 609 92A 2C9 | (24.10.16)
English | 11
22-230 24-180
JH H
H82 2.. H83 1..
2200 2400
1500 1600
6500 8500
230 180
M 14 M 14
25 25

–
– –
– –
5.3 5.0
5.2 4.9
/II /II
26-180
JH H
H55 1..
2400 2600
1600 1700