Operating And Display Elements - Autosen AS005 Notice D'utilisation

7 Operating and display elements

1, 2, 3: Indicator LEDs
• LED 1 = switching status OUT1 (lights if output 1 is switched)
• LED 2 = process value in the indicated unit of measurement:
%, m/s, l/min, m3/h, °C, 10
• LED 3 = switching status OUT2 (lights if output 2 is switched)
4: Alphanumeric display, 4 digits
• Indication of the current process values in red or green characters → 4.9.
• Display of the parameters and parameter values
5: Buttons up [▲] and down [▼]
• Select parameter
• Change parameter value (hold button pressed)
• Change of the display unit in the normal operating mode (Run mode)
• Lock / Unlock (buttons pressed simultaneously > 10 seconds)
●
6: Button [ ] = Enter
• Change from the RUN mode to the main menu
• Change to the setting mode
• Acknowledge the set parameter value
60
2
1
6 5
3
3
4