10�1 Io-Link Process Values; Mounting - Autosen AS005 Notice D'utilisation

The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�autosen�com�
4.10.1 IO-Link process values
The process values for flow and temperature are transmitted via IO-Link in the
following units of measurement:
Operating mode
REL
LIQU
GAS
A change of [uni] does not affect the IO-Link process values�

5 Mounting

CAUTION
For medium temperatures above 50 °C (122 °F) some parts of the housing can
heat up to over 65 °C (149 °F).
> Risk of burns�
► Protect the housing against contact with flammable substances and
unintentional contact�
► Ensure that the system is free of pressure during installation�
► Ensure that no media can leak at the mounting location during installa-
tion�
Using process adapters the unit can be adapted to different process connections�
Adapters have to be ordered separately as accessories�
• Information about the available mounting accessories at www�autosen�com�
54
Unit of the transmitted process values
%
m/s
m/s
°C
°C
°C