Operating And Display Elements - Autosen AL001 Notice D'utilisation

7 Operating and display elements

1: 4 x LED green
2: 4 x LED yellow
(two not
connected)
3: 4-digit
alphanumeric
display
4: Programming
button
[SET]
5: Programming
button
[MODE/ENTER]
Lighting LED = power and set display unit (mm, m, inch)
Indication of the switching status; lights, if the corresponding
output is switched�
Indication of the measured distance, the parameters and
parameter values�
Setting of the parameter values (scrolling by holding pressed;
incrementally by pressing once)�
Selection of the parameters and acknowledgement of the
parameter values�
UK