GB
Functional description
The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction flow is switched off by a float dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and filters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard floor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specific nozzle to vacuum cushions
and mattresses.
Specific nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb fine dust e.g. stone
dust or wood dust.
30
Technical data
Rated voltage ..... 220-240 V~, 50/60 Hz
Rated power input
(Power consumption) ................. 1300 W
Safety class ......................................
Protection category...........................IPX4
Suction force ............. 15 kPA (150 mbar)
Mains cable length ........................... 4 m
Waste tank capacity (gross)............... 20 l
Usable container volume (water) ........ 12 l
Weight (incl. all accessories) .. approx. 4.6 kg
Technical and visual modifications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
Safety information
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm/damage.
Notice symbol with information on
how to handle the device properly.
II