General Description; Functional Description; Overview - Parkside PNTS 1300 C3 Instructions D'origine

General description

The illustration of the principal
functioning parts can be found on
the front and back foldout pages.
Contents
Unpack the appliance and check that it is
complete. The appliance is supplied with
the motor head fitted (
motor head, open the securing clips (
10).
Dispose of the packaging material properly.
1 Motor housing
2 Carrying handle
6 Waste container
7 4 feet with castors and acces-
sory fittings
9a Cable clip
12 3-part vacuum tube
13 Vacuum hose with handle
15 Foam filter
16 Material filter (already mounted)
17 Paper filter bag
18 Floor nozzle with
20 Crevice nozzle
- 6 cross-head screws
- Instruction Manual

Functional description

The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction flow is switched off by a float dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
1). To remove the

Overview

Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 4 attachment ports for accesso-
ries
5 Suction connection
6 Waste container
7 4 feet with castors and acces-
sory fittings
8 Cable holder
9 Mains cable
9a Cable clip
10 2 locking clips
11 Blower connection
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam filter for wet vacuuming
16 Material filter for dry vacuuming
(already mounted)
17 Paper filter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle with
19 Turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces
20 Crevice nozzle
21 Filter basket
22 Flaps on the paper filter bag
23 Intake connections
24 Sealing ring
25 Lip on the suction pipe
G B I E
5