Table des Matières
Publicité
MAINTENANCE AND SAFETY CHECKS
ELECTRONICS
•
Check all controls to make sure all functions work properly.
•
Foot control
•
Head control
•
Hi/Lo
•
Check all cables for damaged or frayed wires.
•
Power cord
•
Pendant cord
•
Check to make sure all plugs are fully inserted or attached.
Bed frame and sleeping surface
•
Visually check all welds
•
Head section
•
Foot section
•
Main Frame
•
Check joints between sleeping surface sections for loose fasteners.
Cleaning
•
The metal parts of the bed are covered with a powder coating. Clean all coated parts with mild Detergent
and warm water. Periodically raise head and feet sections of the bed and remove dust from frame. Also, peri-
odically remove mattress and clean mattress deck.
Lubrication and Mechanical
•
Lightly grease all actuator screw threads with white lithium grease.
•
Lubricate all caster roller and swivel bearings with light machine oil.
•
Check all bolts and tighten as needed.
WARRANTY
Lifetime warranty on welds.
Five year warranty on frame.
One year warranty on all other parts and components.
During the warranty period, defective items will be repaired or replaced at Drive's option at no charge.
Drive recommends the following maintenance and
cleaning procedures be conducted between users.
Publicité
Table des Matières
