Maintenance
➤ Use a screwdriver to carefully pry the lid (fig. q 1, page 41) out of its
mounting and remove it.
➤ Lift the lid and seat.
➤ If necessary, remove the components of the Autoclose with the markings
"CW" and "CCW".
➤ Take the new components of the Autoclose and place the part with the
"CW" mark in the left hinge and the component with the "CCW" mark in
the right hinge.
➤ Lower the lid by tapping it.
✓ The seat and lid lower slowly.
➤ Place the lid (fig. q 1, page 41) into the mounting.
r
42
Saneo B, Saneo C
CW = left
CCW = right
EN