Purmo VIDO 1370071 Manuel D'installation, D'utilisation Et De Service page 9

8.0 Water Connection
(continued...)
How to bleed/vent
Condensate drain connection
Ensure all water fittings are secure before filling the system.
Fill the system, open the valves fully and check pipe connections
for leaks and vent the heat exchanger.
Installations with chilled water will require provision for
condensate disposal in accordance with any local regulations.
A drain tray is fitted for condensate collection within the unit. This
Spiggot size
15mm O/D
Connecting tube
>15mm I/D
should be connected to a 15mm drain pipe.
Alternatively a condensate disposal pump is available as an
accessory, e.g. for use on internal walls (see Section 15). This will
include the drain pipe.
09