Control System Set-Up And Operating Instruction; General Description; Unit Operation - Purmo VIDO 1370071 Manuel D'installation, D'utilisation Et De Service

12.0 Control System Set-up and Operating Instruction

General Description

The electronic control system on this unit provides a wide range of
options that can be selected according to system complexity and
operating requirements.
The unit is factory set to 'Easy Mode' giving thermostatic
temperature control, fan only option and clock function.
Easy Mode
Fixed fan setting
Comfort setting
Clock setting
Power on/off
See our Easy Mode
video on our website.

12.1 Unit Operation

Use ( ) and ( ) keys to choose from the operating modes
described in section 12.2. A function is selected when the relevant
icon is highlighted by .
Turn on Electrical Supply
Easy Mode
(Factory Default)
Select Clock
and set time
Select Comfort setting
Set room temperature to
desired setting (default 21°C).
Fan runs in heating/cooling
Additional functions are available if necessary from the Full
operating mode menu.
A range of additional parameters and features can be changed or
activated in a further set up menu should these be required.
Press & hold (+) & (-) for 5 secs
to change between modes
Press & hold (+) & (-)
for 5 secs to change
between modes
Use (
operating mode (refer to
Full Mode
Fixed fan setting
Comfort setting
Auto setting
Auto
Night set-back setting
Holiday setting
Power on/off
Clock setting
Program menu
P
Full Mode
) and ( ) keys to select
section 12.2 for details)
Select Auto mode and
press (OK) for 10 secs
Setup parameters
(refer to section 12.3
for details)
17