Thrustmaster T.16000M Manuel De L'utilisateur page 6

ADJUSTING THE THUMB REST FOR RIGHT- OR LEFT-HANDED

MODE
By default, the stick's thumb rest is configured in RIGHT-HANDED MODE.
To adjust it to LEFT-HANDED MODE:
A) Remove the right-handed screw cover (3) located on the right of the stick.
B) Using a small screwdriver, unscrew and completely remove the long screw now
accessible (on the right of the stick).
C) Remove the right-handed thumb rest (8) located on the left of the stick.
D) Position the left-handed thumb rest (10) (included separately in the joystick's box) on the
right of the stick.
E) Position the long screw in the opening on the left of the stick and completely tighten the
screw in order to fasten the left-handed thumb rest in place.
F) Position the left-handed screw cover (11) (included separately in the joystick's box) on the
left of the stick.
Note: Carry out this procedure in reverse to return to right-handed mode.
PC
INSTALLATION ON PC
1. Connect the PC USB connector (9) to one of your computer's USB ports.
Windows XP, Vista, 7 or 8 will automatically detect the new device.
2. The drivers are installed automatically.
Follow the on-screen instructions to complete the installation.
3. Click Start/Settings/Control Panel and double-click Game Controllers.
The Game Controllers dialog box displays the joystick's name with OK status.
4. In the Control Panel, click Properties to test and view all of your joystick's functions.
You are now ready to play!
IMPORTANT NOTE
When connecting your joystick: always set the stick and the rudder to their central positions,
and avoid moving them (to avoid any calibration problems).
3/6