Installation Dimensions; Changing Over Door Hinges - Electrolux EK 260 10 RE WE Mode D'emploi

Installation dimensions

A
1524
SMS 12/6
SMS 14/6
1778
32
(mm)
B C
1523 1514
1777 1768

Changing over door hinges

• Unscrew decor frame .
1
• Tilt the door to the front and lift off.
• Transfer plug .
bm
• Remove cover .
bl
• Unscrew hinge bracket
5
• Transfer cover to the opposite side.
9
• Unscrew hinge bracket
6
• Transfer plug .
bn
• Unscrew hinge pin and screw into the adjacent fastening hole.
3
• Unscrew hinge bracket
8
• Unscrew hinge pin and screw into the adjacent fastening hole.
7
• Remove covers and transfer to the opposite side.
2
• Remove plugs and transfer to the opposite side.
4
• Screw hinge bracket into place on the opposite side.
8
• Suspend lower door on hinge pin
• Screw hinge bracket into place on the opposite side.
6
• Screw hinge bracket into place on the opposite side.
5
• Replace cover .
bl
• Suspend upper door on hinge pin
• Insert hinge pin and tighten.
1
.
and lift lower door of upwards.
.
and close.
8
and close.
6