Care And Maintenance - EtiamPro EP60SQ60W30V1 Mode D'emploi

EP60SQ60W30V1/EP60SQ60W40V1/EP120R60W30V1/EP120R60W40V1
Take the measures from the panel light and drill four holes in the ceiling for the ceiling mounts.
Insert a plug in each of the holes.
Fix the cable set to the ceiling. Fix the panel light to the cable set. Cut of the excess wire ends
if necessary. Make sure to keep at least 10 mm of wire showing, so that you can still easily
adjust the wire length later if necessary.
Connect the panel to the power driver.
For more information about the power supply, please contact Mean Well Europe BV at
www.meanwell.eu.
Please go to the product's page on
files and photometric test reports.
5.

Care and Maintenance

Care
• This appliance does not need any particular maintenance. However, regularly check the
mounting installation. Do not use the appliance if there is visible damage.
Cleaning
• Regularly clean the protection shield screens to optimize the light output.
• The frequency of cleaning depends on the operating environment: wet, smoky or
particularly dirty surroundings can cause more accumulation of dirt on the optics of the
appliance.
• Before cleaning, disconnect from the mains. Use a lint-free damp cloth for cleaning. Never
use solvents or alcohol for cleaning. Always dry the parts carefully.
V. 01 – 21/10/2019
www.velleman.eu for more information on the different IES
7 ©Velleman nv