EtiamPro EP60SQ60W30V1 Mode D'emploi page 4

EP60SQ60W30V1/EP60SQ60W40V1/EP120R60W30V1/EP120R60W40V1
Installation in a System Ceiling
Remove the panel and install the power cord.
Install and connect the driver to the power cord.
This appliance does not have a built-in device to disconnect it from the electric mains. Make
sure to electrically isolate the luminaire before installation or maintenance activities are
performed.
Connect the power cable to the screw terminal. Make sure there is no strain on the cable; leave
sufficient slack.
Install the luminaire in the ceiling recess.
V. 01 – 21/10/2019
N = neutral, blue
L = line, brown
4 ©Velleman nv