EtiamPro EP60SQ60W30V1 Mode D'emploi page 5

EP60SQ60W30V1/EP60SQ60W40V1/EP120R60W30V1/EP120R60W40V1
Installation in a Plaster Ceiling
Remove the screws and replace with M3x5 screws and clamps. These clamps are not included.
Please contact Velleman to order the panel clamps (Velleman order number EP60SQCLP).
Cut out the recess and install the power cord.
Cut-out dimensions for EP60SQ60W30V1/EP60SQ60W40V1: 575 x 575 mm.
Cut-out dimensions for EP120R60W30V1/EP120R60W40V1: 275 x 1175 mm.
Provide suitable cabling from the mains and connect to the driver. See installation procedure
above.
Install the luminaire in the ceiling recess.
V. 01 – 21/10/2019 5 ©Velleman nv