First Time Installation; Media Browser (In Dtv Mode); Playing Audio Files - TECHWOOD TL3210TN875 Mode D'emploi

First Time Installation

The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight "First Time
Installation" menu item and press OK button, then
you will be asked whether or not to delete the settings.
Selecting "Yes" by pressing OK button while the "Yes"
is highlighted, will delete the existing channel table.
After factory settings are loaded, "First Time
Installation" menu will be displayed.
The menu which is displayed for language selection
appears on the screen at fi rst. By using " " or " "
buttons, select the desired language option, and press
OK button to activate.
After then, "First time installation" OSD will appear on
the screen. By pressing " " or " " buttons, select the
Country you want to set and press OK button (* only
for EU countries).
Next, active antenna mode selection OSD will appear
on the screen. Use " " or " " to set and press OK to
continue. See the section, "Initial Settings" for more
information.
After active antenna mode option is selected, a
message asking for automatic search appears on
the screen:
Highlight "Yes" item by pressing " " or " " buttons
and press OK button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen. This process is same as described in
Automatic Search section.

Media Browser (in DTV mode)

Whenever you plug a USB fl ash disk to your TV, the
following message will be displayed on the screen:
Select YES or NO by pressing " " or " " button and
"OK" button to continiue.
You can also select Media Browser item from the main
menu by using " " or " " buttons. Press OK to view
Media Browser contents.
01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32875W_1059UK_10067832_50165295.indd 20 01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32875W_1059UK_10067832_50165295.indd 20
You can play audio and photo and video (optional)
fi les from a USB fl ash disk.
Note: Some USB compliant devices may not be supported.
Note: Movie Sense and Pixellence features cannot be set
while in Media Browser mode.
Note: If you plug USB stick in analogue mode, the TV will
automatically switch to digital TV mode.
Note: If the USB stick is not recognized after Power off/on or
First Time Installation, fi rst plug the USB device out and power
off/on the TV set. Plug the USB device again.
Press OK to browse, "MENU" to quit.

Playing Audio Files:

Play This (OK) : Plays the selected fi le.
Play (GREEN) : Play all media fi les in the folder
starting with the selected one.
Pause/Resume (YELLOW button): Pauses or
resumes playback.
Stop (RED) : Stop the playing fi le.
Previous/Next ( / ) : Jumps to previous or next
fi le to play.
Shuffl e (INFO) : Plays the fi les randomly. If shuffl e
mode is enabled, previous/next functions will also
jump to the tracks randomly.
Loop (BLUE) : Plays the selected fi le repeatedly.
English - 20 -
19.03.2010 16:33:08 19.03.2010 16:33:08