Widescreen; Idtv Menu System; Channel List; Navigating The Entire Channel List - TECHWOOD TL3210TN875 Mode D'emploi

Widescreen

Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the "WIDE" button repeatedly to
change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE : Menu size changes depending on the
chosen image size.

IDTV Menu System

• Press "MENU" button and DTV main menu will be
displayed.

Channel List

Using " " or " " buttons on the remote control in
main menu, make sure that the fi rst item, Channel
List, is highlighted and press the OK button to display
the Channel List.
You can use following buttons for Move, Delete and
Lock functions.
YELLOW: Tags/untags the selected channel.
BLUE: Tags/untags all channels.
• Channel List is the place where the channels are
managed.

Navigating the Entire Channel List

• Press " " or " " keys for selecting the previous or
next channel.
• You can press P+ or P- buttons to move page up
or page down.
• To watch a specifi c channel, highlight it using " "
or " " buttons and then press OK button, while the
"Select" item on Channel List menu is highlighted
via " " or " " buttons.
Moving the channels in the channel
list
• Press " " or " " buttons to select the channel that
will be moved.
• Press " " or " " buttons to select the ''Move'' item
on Channel List menu and press OK to confi rm.
01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32875W_1059UK_10067832_50165295.indd 14 01-[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32875W_1059UK_10067832_50165295.indd 14
Note: If you enter the same programme number of the
channel that you want to move, "....services will be replaced.
Do you want to continue?" OSD will be displayed. Press
OK to confi rm or select "No" to cancel.
Note: The following screen will be displayed when want to
move or delete channels that are sorted by LCN (logical
channel number) service.
Select "YES" to continue. Select "NO" to cancel (LCN feature
is available for only Germany, Austria, Switzerland and Italy
country options).
Deleting the Channels in the Channel
List
• Press " " or " " buttons to select the channel that
will be deleted.
• Press " " or " " buttons to select the "Delete'' item
on Channel List OSD.
Press "OK' button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.

Renaming channels

To rename a specifi c channel, the channel must be
highlighted via pressing " " or " " buttons and then
highlight the "Edit Name" item by pressing " " or "
" buttons. Press "OK" button to activate rename
feature.
English - 14 -
19.03.2010 16:33:04 19.03.2010 16:33:04