Mittelmann MRG9 easy Mode D'emploi D'origine page 15

For this reason only touch the device with gloves.
Every combination of different equipment can cause unexpected dangerous situation that have a
negative influence on safety of the user.
Anchor points must be located above the user of the device and have a break strength of at least
10 kN in accordance with the EN 795 standard or in accordance with local and/or national
requirements.
In case of any doubts about the safe condition or the safe function of the device it has to be taken
out of use immediately.
Healthy limitations (f.e. heart- or circulation problems or use of medicines) can have a negative
influence on the safety of the user in usual and emergency cases.
The descent operation has to be controlled permanently by the user.
It can be very difficult to regain lost control.
The lifting and descending function of this device may only be used for rescue purposes and not for
lifting and descending of any other load.
Avoid descending into electrical, thermal, chemical sources or other hazards.
Do not use any incompatible rope or change the rope by yourself.
9. Explanation of the marking
MRG9 easy MRG9 easy+
Mittelmann Sicherheitstechnik GmbH & Co. KG Manufacturer
0,8 m/s
xxxxxxxxxxxx
xx/xxxx
min. 50 kg
max. 200 kg
max.160 m
max. 140 kg / max. 200 kg
max. 30 m
EN341:2011/1A (100 kg) Number and year of the document whose regulations are fulfilled by the
1B (200 kg) equipment and type and device class
EN1496:2006/B
48x160m max. 100 kg
5x160m max. 200 kg
-40° C - +60° C
Symbol indicating that the instructions for use have to be observed:
0158
CE marking and code number of the notified body intervening for the test of the
PPE: DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Germany
Rope:
Length: xxx m
Ø 9 mm
Ø 10,5 mm
Date: xxxx
EN1891:1998
Serial-No: xxxxxx
Version: 02.12.2015
Number and year of the document whose regulations are fulfilled by the
equipment, device class
Maximum number of descents according to device Class A
Maximum number of descents according to device Class B
Temperature range for the use of the device
Length of rope
Diameter of rope
Diameter of rope
Year of manufacture of rope
Number and year of the document whose regulations are fulfilled by the rope
Serial number of rope
Identification mark
Indication of the Descent velocity
Serial number
Month/Year of Manufacture
Indication of the minimum descent load
Indication of the maximum descent load
Indication of the maximum descent height
Indication of the maximum lifting capacity
Indication of the maximum lifting height