Playing A Track - PIONEER DJ DDJ-RB Mode D'emploi

Adding audio tracks into
[Collection]
The [Collection] screen contains a list of audio track files managed by
rekordbox.
Register audio tracks on your computer to rekordbox, and analyze them
so they can be used on rekordbox.
1 Click [Collection] on the tree view.
2 Open Finder or Windows Explorer, and then drag &
drop audio track files or folders with audio track files
into the audio track list.
Audio track files are added into [Collection], and then analyzing of
waveform information for audio track files starts.
Wait until analyzing of all audio track files is completed.
Loading an audio track into a deck
of the unit
This section explains how to load an audio track into Deck 1 (left) as an
example.
Turn the rotary selector to select an audio track from
[Collection], and then press the [LOAD] button on Deck
1 (left).
The selected track is loaded.

Playing a track

This section explains how to output sound from Deck 1 (left) as an
example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
TRIM control
EQ (HI/MID/LOW) controls
FILTER control
Channel fader
MASTER LEVEL control
Crossfader
Position
Turned fully counterclockwise
Center position
Center position
Bottom position
Turned fully counterclockwise
Center position
2 Press the [PLAY/PAUSE f] button to play the
track.
3 Turn the [TRIM] control.
Adjust the [TRIM] control so that the [CHANNEL LEVEL] indicator's
orange indicator lights at the peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output teminals to an
appropriate level.
• The sound is output from the speaker(s) that you selected.
9
En