Velleman CAMIP3 Notice D'emploi page 4

Make sure the camera's IP address is the same as the computer IP
address. Click the Set IP Address button to change the address if
necessary.
Enter the LAN parameters which were recorded before (IP address, the
subnet mask and the default gateway).
Attention: The IP address consists of the first three values. Make sure to
enter a different last value for the camera IP address than that of the
computer's. Contact your provider to make sure how to set the last value of
your camera's IP address. See example.
Click OK and enter the administrator's user name (admin) and password
(123456).
Click OK. The system assigns a new IP address for the camera.
Click OK. The new IP address of your camera is displayed.
Select the camera and click visitIPCam. The Internet Explorer will connect
your camera automatically.
The user interface will be displayed. Enter your camera IP address in the
Internet Explorer browser, e.g. http://10.20.30.249.
Click the User Zone button. The login window will be displayed.
Enter the user name (admin) and password (123456) and click OK.
CAMIP3_v2
- 4 - VELLEMAN