Quick Start - Velleman CAMIP3 Notice D'emploi

CAMIP3 – IP CAMERA (NETWORK CAMERA)
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. Quick Start

• Connection to the LAN
CAMIP3_v2
Connect the network cable to the RJ45 port.
Connect the power adapter to the power socket and connect the adapter to
the mains.
Start up your computer and make sure it connects to the LAN. Click Start >
Running and enter Command (Windows
2000/XP). Select OK, enter ipconfig and press Enter.
The basic setting of your network will look as illustrated.
Record the IP address, the subnet mask and the default gateway. This
information can be used to set your device.
Insert the CD into the CD-ROM drive and copy the VilarWizard_CN.exe file
onto your computer. Open the file. The interface will pop up.
This interface shows us all the IP cameras in your LAN. Press the refresh
button to refresh the list.
If your LAN contains many cameras, find your camera by checking the
serial number.
- 3 -
95/95/ME) or Cmd (Windows
® ®
VELLEMAN