VOLTCRAFT CT-1500Pb Notice D'emploi page 39

For example, if a lead accumulator is always charged and discharged to 100%, it
reaches the end of its lifespan after 100 to 100 cycles. However, if only used to 30%
of its capacity followed by charging, up to 1200 cycles are possible.
The CT-8000Pb also considers the charge reserve of 10 to 20 percent, which has a
positive influence on the lifespan.
Six different charge and maintenance programs take ideal care of your lead accumu-
lator without a great effort. The „Winter" program simulates driving mode also when
the accumulator is taken out, which always gives you a functioning accumulator in
the spring.
Peculiarities:
- Determination of the remaining charge when the accumulator is connected
- Assessment of the accumulator status (degree of effectiveness - self-discharge) in
four stages from unusable to excellent.
- Pronounced reduction of the charging time compared to standard chargers
through the four-stage charging process.
- As of a charging state of approx. 80%, the charging process can be terminated
early for urgent requirements. The CT-8000Pb shows this possibility.
Connect the mains plug of the charging station with a suitable mains socket and turn
on the device.
Without a connected accumulator, the ready for operation display appears together
with the ambient temperature.
" * CT8000
" 22° C
Avoid direct sunlight on the device and the accumulator.
If an accumulator is not connected, you can set the language (German or English)
and the display contrast. Confirm the respective setting with OK or cancel it by
pressing ESC.
"LANGUAGE
"1. GERMAN
"2. ENGLISH
"CONTRAST
"1. HIGH
"2. MID
"3. LOW
* "
"
"
"
"
"
"
"
"
39