Operating Elements; Installation And Initial Use; Using The Ice Cream Maker - Micromaxx MD 15396 Mode D'emploi

6.1. Operating elements

1) Display indicator
2) Setting the timer
3) Switching on/off

7. Installation and initial use

 Before using the device for the first time, clean all parts that come into contact
with foodstuffs (ice cream container, stirrer, cover) thoroughly. Please note that
the parts are not dishwasher safe.
 Detach the motor block from the cover before cleaning. First remove the stirrer
and press in the tabs towards the drive shaft and use the other hand to pull off
the motor block.
NOTE
The appliance is driven by an electric motor. This can lead to a slight
smell during initial operation. This smell is normal and is not a sign of a
malfunctioning appliance. Ensure that there is adequate ventilation.

8. Using the ice cream maker

 Pack the ice cream container into a sufficiently large freezer bag.
 Place the ice cream container upright in the freezer compartment.
At a temperature of –18°C, the cooling process takes around 1 hour. If the tempera-
ture is higher, the cooling process can last anything up to about 16 hours.
52 of 58
1
TIME
3
2