Switching The Machine Off - BORETTI BVW-652 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you would like to cancel a program while a washing program is resumed
Open the door of your machine.
Light of the last selected
program will turn on.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.

Switching the machine off

Note: After the buzzer sound which indicates the end of the program when the washing program
comes to an end (end indicator light is on), you can leave the door of your machine ajar in order to
hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the
program in case the door is shut or the power is back.
Note : If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
Keep the program selection button
pressed for 3 seconds. (End of
program indicator flashes and
program light turns off)
Pull the plug out of the outlet.
Turn of the water tap.
24
Discharge process starts after closing
the door of the machine.The machine
discharges the water in it for about 30
seconds.When the program is
cancelled,your machine gives a
buzzer sound
for "5 times " and the "end of
program indicator" turns on.
When end of program indicator
turns on , switch your machine
off by using the Power On/Off
button.

Publicité

Table des Matières
loading

Table des Matières