Festool VAC SYS SE Notice D'utilisation D'origine page 13

Vacuum clamping unit VAC SYS SE
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
6 Commissioning
7 Operation
8 Maintenance
9 Disposal
10 Accessories
11 Warranty
12 EU Declaration of Conformity
13 Fault correction
1 Symbols
Warning of general danger
Electric shock
Read the operating instructions/notes
Advice or tip
The specifi ed illustrations are at the beginning of
this operating manual.
2 Technical data
Vacuum pump end pressure abs.
Weight of vacuum clamping unit SE 1
Weight of vacuum clamping unit SE 2
Protection class
Holding force of the vacuum clamping unit
Holding force 90°
Suction
tilted 1, 2 (workpi-
plate
ece vertical) [kg]
D 215 55
275x100 35
200x60 22
277x32 21
Maximum workpiece dimensions
Suction
plate
D 215
275x100
200x60
277x32
1
2
3
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
[2-1]
[2-2]
[2-3]
[2-4]
[2-5]
[2-6]
4
The vacuum clamping unit VAC SYS SE is designed
for clamping objects with fl at, smooth, airtight
150 mbar
surfaces in combination with vacuum pump
8.3 kg
VAC SYS VP.
8.1 kg
The user bears the responsibility for damage and
/ II
accidents caused by improper use.
5
Holding force
0° tilted 1, 2
5.1
(workpiece ho-
- Before using the device, carefully read the safety
rizontal) [kg]
90
53
30
27
- Never allow children to use the device.
- Before using the device, make yourself suffi -
- Keep the working area clean and tidy. Untidy,
- Never operate the device in a potentially explo-
13
Maximum dimen-
1
sions [m]
1 x 1
1.2 x 0.4
0.8 x 0.2
1.2 x 0.08
Specifi cations for smooth surfaces such as PMMA (plexiglas
PF hard fi bre (Resitex) and worktops, not for MDF or similar
materials.
The holding force may decrease by up to 20% over the course
of the years. Values relate to a vacuum of 85% (150 mbar end
pressure) and include a safety factor of 2.
Machine features
Mains connection
On/off switch
Vacuum gauge
Ventilation slits
Vacuum connection
Slide valve
Rotary knob for clamping the suction
plate
Locking pin for suction plate
Clamp lever for tilting fi xture
Foot valve
Suction plate
Intended use
Safety instructions
General safety instructions
instructions, these operating instructions and
the operating manual accompanying the vacuum
pump VAC SYS VP all the way through. Keep all
of the accompanying documents and pass on if
the device changes ownership.
ciently familiar with the procedures for using,
setting and operating the device.
unlit working areas may lead to accidents.
Maximum
1
weight [kg]
30
20
10
8
),
®