Electrolux EWF 1408 WDL2 Notice D'utilisation page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18
www.electrolux.com
10.8 Starting a programme
without the delay start
Press the
• The indicator of the
flash and stays on.
• The display updates accordingly
during the washing programme.
• The programme starts, the door
locks, the display shows the
indicator
If the indicator
door is locking. If the display
shows an alarm message after
the indicator
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
10.9 Starting a programme with
the delay start
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
countdown.
• The door locks, the display shows
the indicator
If the indicator
door is locking. If the display
shows an alarm message after
the indicator
.
.
flashes, the
has flashed for a
automatically the
programme duration
agree with the laundry
load.
new value.
again and again until the
:
.
flashes, the
has flashed for a
• When the countdown is
stops to
10.10 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press
The indicator flashes.
2. Change the options.
3. Press
The programme continues.
10.11 Cancelling a running
programme
1. Press the button
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press
to set the
appliance to pause.
• Press
until the
display shows
• Press
again to
start the programme
immediately.
.
again.
for some
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
. To
'.

Publicité

Chapitres

Table des Matières
loading

Table des Matières