Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14 English
3. Device description
Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Device components
1
Depth stop
2
Bit holder
3
Adjustment ring for depth stop
4
ON/OFF switch
5
Stop button
6
Rotational direction switch
7
Belt hook
Scope of supply
See packaging
Specified Conditions of Use
o
The machine is intended for driving in and loosen-
ing screws.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.
Technical Data
Dry Wall Screwdriver
Input power
Output power
Idle speed n
0
Tool holding fixture
Driving screws into wood
Length of screw
Torque (rated load)
Collar diameter
Corner dimension
Weight
Your power tool is doubly insulated in
compliance with EN 60745; there is
thus no need for an earth wire.
The machine is radio and TV interference-free in
accordance with EN 55014-1 and interference-
proof in accordance with EN 55014-2.
Noise and Vibration Information
Noise levels
Measurement values determined according to EN
60 745.
The A-weighted noise level of the device is typical-
ly:
Sound pressure level (L
Sound power level (L
Measurement uncertainty K
The noise level can exceed 85 dB(A)
during operation.
Wear ear protection!
Vibration
Triaxial vibration emission level determined in ac-
cordance with EN 60745.
Screwing
Measurement uncertainty K
The vibration emission level given in
this information sheet has been
measured in accordance with a
standardised test given in EN 60745
and may be used to compare one
tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
Device description
ESR 500
0..4650 min
0,77 Nm
22,5 mm
)
78 dB(A)
pA
)
89 dB(A)
wA
3 dB
m/s²
m/s²
500 W
255 W
-1
1/4''
5 mm
60 mm
43 mm
1,5 kg
< 2,5
1,5
Publicité
Table des Matières
