Specifications; Plug Configurations - Hatco HXmH-24 Manuel D'installation Et D'utilisation

English

Plug Configurations

Units are equipped with an electrical cord and plug appropriate
for the electrical rating of the unit and must be connected to a
dedicated circuit.
WARNING
ELECTRIC SHOCK HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: The specification label is located on the side of the
control enclosure. See the label for the serial number
and verification of unit electrical information.
Electrical Rating Chart — HXMH-XX Models (Horizontal Single Shelf)
Model Voltage
HXmH-24 120
HXmH-30 120
HXmH-36 120
HXmH-42 120
HXmH-48 120
HXmH-54 120
HXmH-60 120
Electrical Rating Chart — HXMH-XXD Models (Horizontal Dual Shelf)
Model Voltage
HXmH-24D 120
HXmH-30D 120/208–240
HXmH-36D 120/208–240
HXmH-42D 120/208–240
HXmH-48D 120/208–240
HXmH-54D 120/208–240
HXmH-60D 120/208–240
Form No. HXmm-1215
NOTE: Receptacle not supplied by Hatco.
Watts Amps
700 5.8
900 7.5
1100 9.2
1200 10.0
1450 12.1
1650 13.8
1850 15.4
Watts Amps
1400 11.7
1800 7.5
2200 9.2
2400 10.0
2900 12.1
3300 13.8
3700 15.4
5

SPECIFICATIONS

NEMA 5-15P
NEMA L14-20P
Plug Configurations
Plug Configuration
NEma 5-15P
NEma 5-15P
NEma 5-15P
NEma 5-15P
NEma 5-20P
NEma 5-20P
NEma 5-20P
Plug Configuration
NEma 5-15P
NEma L14-20P
NEma L14-20P
NEma L14-20P
NEma L14-20P
NEma L14-20P
NEma L14-20P
NEMA 5-20P