Technical Data; Hedge Trimmer; Noise Information; Vibration Information - Gardol GBH-I-650 Manuel D'utilisation

TECHNICAL DATA

Hedge trimmer

Engine Type
Engine model
Fuel mixture
Motor power
Contents
tank capacity
Max. engine speed
Min. Clutch speed
Engine idling speed
Cutting length
Max. cut thickness
Unit weight (empty tanks )

Noise information

Measured according to
Sound pressure level L
Measured sound power level L
Guaranteed sound power level L

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s
Vibration emission value a
Vibration emission value a
Subject to technical alterations and amendments.

SPECIFIED CONDITIONS OF USE

The hedge trimmer has been designed to cut hedges
and brushes in private house gardens or hobby
gardens.
WARNING
Risk of injury
The hedge trimmer may not be used to cut grass,
hard brushes and wood or to crush material for
composting purposes.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
EN 60745; 2000/14/ EG; Uncertainty K =3 dB (A)
1) 2)
1)
pA
2)
WA
2)
WA
Front handle
h
Rear Handle
h
and instructions from this manual does not make the
manufacturer liable for damages.
Please note that permissible uses for the tool could
be limited by national regulations. It is necessary to
comply with the regulations applicable in the country
where the truck is used.
Do not use the device near flammable liquids or gases.
Risk of fire and explosion in case of short circuit.
Use the appliance only outside, never use it in confined
and bad ventilated areas.
The safety systems and safety devices of the device
must not be manipulated or deactivated.
EN ENGLISH
GBH-I-650
2-stroke
PN1E32F-2
1:40
0,65 kW
21,7 cm
3
240 cm³
-1
11.000 min
8000 min -1
-1
3000 min
550 mm
28 mm
4,6 kg
85,5 dB (A)
99,5 dB (A)
103 dB (A)
2
5,348 m/s
2
7,672 m/s 2
21