Maintenance Schedule - Gardol GBH-I-650 Manuel D'utilisation

MAINTENANCE SCHEDULE

MAINTENANCE
Clean the outside of the machine.
Make sure the throttle trigger lock and the throttle function correctly
from a safety point of view.
Check that the engine switch works correctly.
Check that the blades do not move when the engine is idling.
Check that the blades are undamaged and show no signs of cracking
or other damage. Replace the blades if necessary.
Check that the blade guard is not damaged or distorted. Replace the
blade guard if it is bent or damaged.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the engine, tank or fuel lines.
Clean the outside of the spark plug. Remove it and check the electrode
gap. Adjust the gap to 0.6-0.7 mm or replace the spark plug. Check
that the spark plug is fitted with a spark plug cap.
Clean the machine' s cooling system.
Clean the outside of the carburetor and the space around it.
Grease inside gear box Filling
Check
Blade
(replace if necessary)
Clean the fuel tank.
Check all cables and connections.
Check the clutch, clutch springs and the clutch drum for wear. Replace
if necessary by an authorized service workshop.
Replace the spark plug. Check that the spark plug is fitted with a spark
plug cap.
To reduce the fire hazard, clean dirt, leaves and surplus lubricant, etc
from the muffler and engine.
Check
Fuel feed line
(replace if necessary)
Hours of operation
Before use
every time
10 25
X
X
X
X
X
X
X
EN
after use
50 100
X
X
X
X
X
X
X
X
X
X
X
ENGLISH
X
X
27