Technical Information; Environment Concerns - AEG FAVORIT 34030VI Notice D'utilisation

32 www.aeg.com
Problem
Dry water drop
stains on glasses
and dishes.
The dishes are wet.
The dishes are wet
and matt.

10. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.

11. ENVIRONMENT CONCERNS

Recycle the materials with the
symbol
applicable containers to recycle it.
Possible cause
The quantity of detergent
was too much.
The released quantity of
rinse aid was not suffi-
cient .
The quality of the deter-
gent can be the cause.
The programme had no
drying phase.
The rinse aid dispenser is
empty.
The quality of the rinse aid
can be the cause.
Width / Height / Depth
(mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
1)
Cold water or hot water
Place settings
Left-on mode
Off-mode
. Put the packaging in
Possible solution
Make sure that you add the
correct quantity of deter-
gent in the dispenser be-
fore you start a programme.
Increase the released quan-
tity of rinse aid.
Try a different brand of de-
tergent.
Set a programme with the
drying phase.
Make sure that there is rinse
aid in the rinse aid dispens-
er.
Try a different brand of
rinse aid.
(0.5 / 0.05 ) / (8 / 0.8 )
2)
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
596 / 818-898 / 555
220-240 V
50 Hz
max. 60 °C
12
0.99 W
0.10 W