Consumption Values; Information For Test Institutes; Settings - ARTHUR MARTIN ASL5341LA Notice D'utilisation

Programme
5)
1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically adjusts the tem-
perature and the quantity of water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing phase, the
temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and odours to
form in the appliance. Do not use detergent with this programme.

Consumption values

1)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.

Information for test institutes

For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
Degree of soil
Type of load
• All
Water
(l)
11
7 - 12
13 - 15
9
4
Programme phases
• Prewash
Energy
(kWh)
1.050
0.6 - 1.4
1.5 - 1.6
0.8
0.1
Write down the product number (PNC) that
is on the rating plate.
• The level of the water softener according
to the water hardness.
• The activation or the deactivation of the
acoustic signal for end of programme.
• The activation or deactivation of the rinse
aid empty notification.
These settings will be saved until you
change them again.
Options
Duration
(min)
195
40 - 150
150 - 170
30
14
7