Connecting External Components - JVC KW-V51 BT Mode D'emploi

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a Smartphone
Android, etc.
(with HDMI)
(commercially available)
Micro USB Micro HDMI (Type D)
Micro USB to
(optional accessory)*
USB cable
Micro HDMI to HDMI
(commercially
adapter (commercially
available)
available)
1.8 m
0.8 m
KS-U60
(optional accessory)
If you connect the HDMI/MHL connector, fix the HDMI/MHL
cable using the fixture (6) and screw (7).
6
7
HDMI/MHL cable
* Use conversion adapter to connect to smartphones if necessary.

Connecting external components

Android, etc.
(with MHL)
(commercially available)
KS-U61
1 AV-OUT/Video output (Yellow)
2 Rear view camera input (Yellow)
3 Audio Video input (AV-IN1)
• Connect the following type of 4-pole mini
plug:
1 3
24
1.8 m
4 HDMI/MHL input
5 Subwoofer preout (monaural output)*
• Subwoofer left output (White)
• Subwoofer right output (Red)
6 Rear preout*
• Audio left output (White)
• Audio right output (Red)
7 Front preout*
• Audio left output (White)
• Audio right output (Red)
8 AV-OUT/ Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
* When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
1 Left audio
2 Right audio
3 Ground
4 Composite video
Connecting microphone for Bluetooth
Connect the microphone (5) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
5
ENGLISH 49